Item Description
A forklift safety toolbox talk gives your crew a short, direct way to talk about machines that move heavy loads all day and can hurt people in seconds. Forklifts and telehandlers are involved in fatal workplace incidents every year, and tip-overs and struck-by events are among the leading causes.
This talk covers the basics that prevent most of those events. Crews will go over inspecting the machine before every shift, traveling with the load low and tilted back, and checking the load chart before every lift. Because a telehandler's boom extends the load away from the machine, the farther out and higher the load goes, the less it can safely carry. The talk explains why that matters.
It also speaks to the people on foot. Workers learn to stay out of the machine's path and blind spots, make eye contact with the operator before crossing, and never walk under raised forks or loads. It also covers keeping at least 10 ft from overhead power lines, using a spotter when the view is blocked, and lifting people only on an approved personnel platform.
The Unsafe Dave story keeps the discussion real. Dave ducks under a raised pallet of block to grab his level, the operator doesn't see him, and a block slides loose right beside him. Safety Sam's message is simple: never go under a load. Most crews have seen someone take that same shortcut.
The talk is written for safety managers, superintendents and foremen who need a clear, discussion-ready topic for a morning huddle. Read it aloud, ask your operators and ground crew what they see on your site, and finish with the quick tips so everyone leaves with something to do differently.
What this toolbox talk covers
- Inspect the machine before every shift starts.
- Keep loads low and tilted back when traveling.
- Never stand or walk under a raised load.
- Stay clear of the machine's path and blind spots.
- Check the load chart before every single lift.
- Lift people only on approved platforms.
DID YOU KNOW?
Forklifts and telehandlers are involved in fatal workplace incidents every year, and tip-overs and struck-by events are among the leading causes. Most of these could be prevented by trained operators, stable loads, and workers staying clear of the machine's path.
Common questions
What should be checked before operating a forklift or telehandler?
Check the tires, forks, boom, brakes, horn, lights and backup alarm before starting work every shift. Any machine that fails the inspection should be tagged out.
Why do telehandlers tip over?
Rough ground, steep slopes and overloaded forks can cause a tip-over in seconds. On a telehandler, the farther out and higher the boom carries the load, the less weight it can safely handle, so the load chart must be checked before every lift.
What should an operator do if a forklift or telehandler starts to tip?
The operator is safest staying in the seat with the seat belt on. Jumping out of a tipping machine puts the operator at greater risk.
Includes the print-ready toolbox talk and a matching safety poster, in English and Spanish, for daily jobsite safety meetings.
